Downloadable Ducting Chart PDF File - Opens in a New Window |
Airtight Self-Seal Ducting
Please note most of our hoods have a motor outlet of 150mm. You will require a reducer collar to use System100 ducting.
We highly recommend using the largest possible size ducting on every installation to maximise air flow.
Please check each product specification guide to determine what size duct you require.
100mm Ducting Quick Links
|
|||
Quick Links | |||
100mm x 60mm 4" Flat Ducting Pipe
100mm x 60mm Flat Ducting Pipe 1 Metre
Flat ducting pipe is ideal for powerful cooker hoods with motor speeds up to 450m³/hr. It is far better at extracting odours and vapours more efficiently that flexible aluminium pipe. We recommend this pipe for all ceiling extractors and all extractors with a minimum of 180m³/hr.
Using our patented air tight connectors ensures very high extraction without loss of suction and requires no ducting tape on the joint.
This is part number 4 from the chart below.
This clip is part of our System100 range, commonly referred to as 4 inch ducting due to the round pipe being 100mm / 4" wide. This system includes both 100mm x 60mm rectangular ducting and 100mm round ducting as they both have similar airflow rates. We supply adapters should you need to switch between these sizes:
100mm x 60mm (4") Flat Ducting Pipe 1 Metre
- Brands Luxair Cooker Hoods Limited
- Product Code: 100-1M-PIPE-RECTANGULAR
- Availability:
-
£17.95
- Ex Tax: £14.96